<ruby id="lrdxp"></ruby><strike id="lrdxp"></strike>
<strike id="lrdxp"><i id="lrdxp"><del id="lrdxp"></del></i></strike>
<strike id="lrdxp"></strike>
<span id="lrdxp"><dl id="lrdxp"></dl></span>
<span id="lrdxp"></span>
<span id="lrdxp"><dl id="lrdxp"><del id="lrdxp"></del></dl></span>
<span id="lrdxp"></span>
<strike id="lrdxp"><i id="lrdxp"></i></strike>
<strike id="lrdxp"><i id="lrdxp"></i></strike><strike id="lrdxp"></strike><ruby id="lrdxp"></ruby><strike id="lrdxp"></strike>
<strike id="lrdxp"></strike><strike id="lrdxp"></strike>
  

Contact us

首頁>Products>DST tools>Various tools used in cased hole testing

RD Sampler

RD Sampler


General

The rupture disk (RD) sampler is a full-open, full bore sleeve sampler for use on drillstem tests. The sampler is controlled by a rupture disk that is operated by annulus pressure.

Features and Benefits

?  Time-delay feature allows the sample to be trapped after a preset time. Different metering cartridges can be used to vary the closing time.

?  Full-open capabilities are retained after the tool has trapped its sample.

?  Several samplers can be run on a test to allow sampling at different times.

Operation

The sampler is controlled by a pressure-operated rupture disk and has a sample mandrel with a built-in differential area. To catch a sample, annulus pressure is increased to a predetermined level, the rupture disk in the sampler breaks, and the mandrel traps the sample.

When the rupture disk breaks, the differential area of the sample mandrel is exposed to an air chamber on one side and hydrostatic pressure and applied annulus pressure on the other. This condition results in the sample mandrel moving up and trapping the sample. When the sample mandrel reaches the top of its stroke, it is locked in place by a set of locking dogs.

The 1,200-cc sample chamber allows a sufficient sample for two 500-cc non- monophasic (bulk) samples.


  • 沒有上一篇了
  • 沒有下一篇了
欧美精品视频在线看你懂的